The Journal · Shilajit
Lab Tested Shilajit: How to Read a Certificate of Analysis
Written by Biyode Health Team16 min readNov 14, 2026
- 10+ years of research
- 180,000+ customers
- Eurofins lab tested
Listen instead
Audio summary of this article
Lab tested shilajit is shilajit whose finished batch has been analysed by a laboratory for heavy metals, microbes and fulvic acid, with the results written up in a certificate of analysis (COA) that you can read before you buy. The test results matter far more than the phrase "lab tested" itself, because that phrase has no legal definition and can be printed on a jar that was tested once, years ago, for one thing.
This guide walks through a shilajit certificate of analysis line by line: what each test means, the official limits to compare against, the per-serving arithmetic, and the red flags. There is a printable checklist near the end.
If you want the broader picture of spotting a poor product before you get to the paperwork, read our guide on how to identify fake shilajit first. This article picks up where that one leaves off: the moment a seller sends you a PDF.
What does lab tested shilajit actually mean?
In the US, the FDA does not approve dietary supplements before they go on sale, and it generally does not approve supplement labels or claims either. Manufacturers are responsible for making sure their products are not adulterated or misbranded. So when a jar says "lab tested", nobody checked that claim before it reached the shelf.
What the law does require is set out in the supplement manufacturing rules, 21 CFR Part 111. Section 111.70 says manufacturers must establish an identity specification for each ingredient, specifications for purity, strength and composition, and limits on the types of contamination that could adulterate the finished batch. A COA is the document a lab produces when it checks a sample against specifications like these.
Why shilajit needs testing more than most supplements
Shilajit forms in rock, and its chemistry reflects where it came from. A 2025 review in Critical Reviews in Analytical Chemistry found that shilajit is mostly humic substances with about a fifth of its weight in minerals, but that its composition varies between regions and is not known with certainty. Because it forms in contact with rock, it can carry trace amounts of toxic metals as well as useful minerals, and the only way to know how much is in a given batch is to test it.
Shilajit also sits in a product category with a known history of contamination. The US National Center for Complementary and Integrative Health notes that some Ayurvedic preparations may contain lead, mercury or arsenic in amounts that can be toxic. A 2008 JAMA study that bought 193 Ayurvedic products online found detectable lead, mercury or arsenic in about one in five, and 75% of the metal-containing products claimed to follow Good Manufacturing Practices. A claim on a label is not a result on a certificate.

How do you read a shilajit certificate of analysis?
Before you look at a single number, read the header. Half of the red flags on a bad COA are visible before the results table even starts.
The header: who, what, when
- Laboratory name and address. A real, independent lab you can look up. If the "lab" is the seller's own company, it is an in-house test, which is useful but not third-party.
- Accreditation. Look for ISO/IEC 17025, the international standard for testing laboratories. In the US, accreditation bodies such as NIST's National Voluntary Laboratory Accreditation Program assess labs against the management and technical requirements of ISO/IEC 17025:2017.
- Client name. The brand or manufacturer that sent the sample. It should match the brand selling you the product, or its named manufacturer.
- Sample description. It should say shilajit resin (or powder, or capsules), not something vague like "herbal sample".
- Lot or batch number. This is the single most important field. It should match the lot number printed on your jar.
- Dates. Date received, date tested and date reported. A COA from several years ago does not describe the jar made last month.
- Report number and signature. A unique report ID and an authorised signatory or approval line, so the lab can confirm the document is theirs.
The results table: test, method, result, unit, limit
Each row of the results should tell you five things: the analyte (for example, lead), the method (for example, ICP-MS), the result, the unit, and ideally the specification or limit it was compared against. If any of those are missing, you cannot interpret the line properly.
Pay close attention to units, because they change the meaning of a number by a factor of a thousand:
| Unit on the COA | What it means | Converting to µg per gram |
|---|---|---|
| ppm (parts per million) | mg per kg, or µg per g | Same number: 1 ppm = 1 µg/g |
| ppb (parts per billion) | µg per kg | Divide by 1,000: 500 ppb = 0.5 µg/g |
| mg/kg | Same as ppm | Same number |
| µg/kg | Same as ppb | Divide by 1,000 |
| CFU/g | Colony-forming units per gram (microbes) | Not a metal unit; compare to microbial limits |
| % w/w | Percent by weight | Check whether "as is" or "dry weight" |
You will also often see "ND" (not detected) or "<LOQ" (below the limit of quantification). These do not mean zero. They mean the amount was too small for that method to measure. A good COA states the detection or quantification limit beside the result so you know how small "too small" is.
What are the safe heavy metal limits for shilajit?
There is no shilajit-specific federal limit for heavy metals in the US. Instead, labs and brands usually compare results against one or more of three reference points. Knowing which one a COA uses, and what it actually covers, is the core skill of reading these documents.
USP General Chapter 2232: the supplement benchmark
The US Pharmacopeia's General Chapter 2232, Elemental Contaminants in Dietary Supplements, sets permitted daily exposures (PDEs) for four elements. These are the maximum amounts a person should take in from a supplement in a day:
| Element | USP 2232 permitted daily exposure | USP 2232 individual component limit |
|---|---|---|
| Lead | 5 µg/day | 0.5 µg/g |
| Arsenic (inorganic) | 15 µg/day | 1.5 µg/g |
| Cadmium | 5 µg/day | 0.5 µg/g |
| Mercury (total) | 15 µg/day | 1.5 µg/g |
| Methylmercury (as Hg) | 2 µg/day | 0.2 µg/g |
The concentration limits in the right-hand column are based on a maximum daily intake of 10 g of supplement. A shilajit serving is usually a fraction of a gram, so for shilajit, the daily exposure figure is the one that matters: you compare the amount of each metal in a day's servings against the PDE, not the raw concentration against the 10 g figure.
Two details in USP 2232 that most COAs gloss over
- Arsenic speciation. The USP limit is for inorganic arsenic, the more toxic form. A lab may measure total arsenic and assume all of it is inorganic, which is the cautious approach. If that total result exceeds the limit, the chapter says compliance must be shown with a speciation test that separates inorganic arsenic.
- Methylmercury. The chapter says methylmercury testing is not needed when total mercury is already below the methylmercury limit. If total mercury is higher than that, you would expect to see a methylmercury result too.
California Proposition 65: a warning threshold, not a safety ceiling
Many brands also compare their results with California's Proposition 65 levels, which decide when a product sold in California needs a warning label. These are deliberately cautious and lower than USP's figures:
- Lead: 0.5 µg/day for reproductive toxicity (California Code of Regulations, title 27, section 25805) and 15 µg/day orally as the cancer "no significant risk level" (section 25705).
- Cadmium: 4.1 µg/day orally for reproductive toxicity (section 25805).
A product that exceeds a Prop 65 level is not necessarily unsafe; it means a California warning is required. But because the lead figure is ten times lower than USP's, it is a useful stricter yardstick, and a brand that meets it at its label serving has very low lead exposure from that product.
The FDA's interim reference levels for lead
The FDA does not set a lead limit for supplements in general, but it has published interim reference levels for lead from all food sources combined: 2.2 µg per day for children and 8.8 µg per day for females of childbearing age. These are not supplement limits, but they help put a single product's contribution into context, since lead from food, water and other sources adds up.
| Reference point | Lead figure | What it is for |
|---|---|---|
| USP 2232 PDE | 5 µg/day | Maximum daily lead from a dietary supplement |
| Prop 65 reproductive level | 0.5 µg/day | Above this, a California warning is required |
| Prop 65 cancer level (oral) | 15 µg/day | Cancer-based no significant risk level |
| FDA interim reference level, children | 2.2 µg/day | Total lead from all food sources |
| FDA interim reference level, females of childbearing age | 8.8 µg/day | Total lead from all food sources |
What about thallium and other elements?
USP 2232 covers only lead, arsenic, cadmium and mercury. Researchers have started looking at others. A 2025 study in BMC Chemistry found the toxic metal thallium in both raw shilajit and shilajit supplements, at up to 0.226 µg/g in raw samples and up to 0.5 µg/g in supplements, with some supplements containing more than some raw material. The authors called for regular monitoring and standardised testing. A COA that includes thallium goes beyond the usual minimum; one that does not is not unusual, but it is worth knowing the gap exists.
How do you check heavy metal results per serving?
This is the step almost nobody explains, and it is where you can catch a COA that looks fine but is not. The arithmetic is simple.
- Convert the result to µg per gram. If the COA says ppm or mg/kg, the number is already µg/g. If it says ppb or µg/kg, divide by 1,000.
- Multiply by your daily serving in grams. A 300 mg serving is 0.3 g. Two servings a day of 300 mg is 0.6 g.
- Compare with the daily limit. Divide your answer by the USP PDE (or the Prop 65 figure) and multiply by 100 to get the percentage of the limit used.
A worked example (hypothetical numbers)
Imagine a COA reports lead at 1,000 ppb and you take one 300 mg serving a day.
- 1,000 ppb ÷ 1,000 = 1.0 µg/g.
- 1.0 µg/g × 0.3 g = 0.3 µg of lead per day.
- Against the USP limit of 5 µg/day: 0.3 ÷ 5 = 6% of the permitted daily exposure.
- Against the Prop 65 level of 0.5 µg/day: 0.3 ÷ 0.5 = 60% of the warning threshold.
Notice that 1.0 µg/g is above USP's 0.5 µg/g component figure, yet the daily intake is well inside the PDE because the serving is small. Now notice what happens if somebody takes three times the label serving: 0.9 µg a day, which crosses the Prop 65 figure. The label serving is part of the safety calculation, which is one more reason not to exceed it. Our shilajit dosage guide explains how serving sizes are usually set.
Always do the per-serving maths yourself. A concentration on its own tells you very little until you multiply it by how much you actually take each day.

How is fulvic acid tested in shilajit?
Fulvic acid is the figure brands most like to advertise, and the one most open to confusion. A 2014 review in Phytotherapy Research identified fulvic acid and dibenzo-alpha-pyrones as the constituents most likely responsible for the effects reported for shilajit, which is why the number gets so much attention. If you want the background on what fulvic acid is, see our explainer on what fulvic acid is.
The method decides the number
There is no single official method for measuring fulvic acid in shilajit, and different methods can give different answers for the same sample. That is why a fulvic acid percentage means little unless the COA names the method.
- Gravimetric methods. A widely cited 2014 method published in the Journal of AOAC International separates humic and fulvic acids following International Humic Substances Society guidelines, isolates fulvic acid on a resin at acid pH, and then weighs it on an ash-free basis. Its authors describe it as differing from earlier methods precisely in that weighing step. A 2026 analytical study of shilajit raw material, extract and resin in the Journal of Chromatography A also used gravimetric analysis for total fulvic acid content.
- Chromatographic marker methods. The same 2026 study developed an HPLC method to quantify marker compounds in shilajit, including fulvic acid, hippuric acid and urolithin A. Marker testing is useful as an identity and consistency check, and it measures specific compounds rather than a whole fraction.
- Unnamed or colour-based tests. If a COA gives a fulvic percentage with no method at all, you cannot compare it with anything.
Dry weight versus "as is"
Resin contains water. A result reported on a dry-weight basis excludes that water, so it will read higher than the same sample reported "as is". Neither is wrong, but you can only compare two products if they use the same basis and the same method. A COA should say which.
Is there a "good" fulvic acid percentage?
No official standard sets a minimum fulvic acid percentage for shilajit, and we found no study showing that a higher percentage produces a greater effect in people. A clearly reported figure with a named method is a sign of a transparent brand. A very high headline number with no method is a sign of marketing. The gold grade shilajit guide explains why grade names built on these numbers deserve the same scepticism.
Identity testing
Under 21 CFR 111.70, manufacturers must have an identity specification. For shilajit, identity might be shown by marker compounds, a chromatographic fingerprint or other characteristic tests. A COA that confirms identity answers a question the heavy metal panel cannot: is this actually shilajit?

What microbial limits should a shilajit COA meet?
Shilajit is collected from the open environment and often dried at modest temperatures, so microbial testing matters as much as the metals panel. A product can pass every heavy metal test and still carry too many bacteria or moulds.
USP General Chapter 2023 reference values
USP General Chapter 2023, Microbiological Attributes of Nonsterile Nutritional and Dietary Supplements, gives recommended limits by product type. Shilajit is not a plant, so it does not fit neatly into any one category, and labs choose the nearest. The categories most often used look like this:
| USP 2023 category | Total aerobic microbial count | Total yeasts and moulds | Salmonella and E. coli |
|---|---|---|---|
| Powdered botanical extracts | Not more than 104 CFU/g | Not more than 103 CFU/g | Absent in 10 g |
| Nutritional supplements with botanicals | Not more than 104 CFU/g | Not more than 103 CFU/g | Absent in 10 g |
| Dried or powdered botanicals | Not more than 105 CFU/g | Not more than 103 CFU/g | Absent in 10 g |
For context, 104 CFU/g is 10,000 and 103 is 1,000. When reading a microbial panel:
- Pathogen results should read "absent", "negative" or "not detected", with the sample size stated (for example, "absent in 10 g").
- Counts should be compared with a stated limit, not just listed.
- A result shown as "<10 CFU/g" means below the method's counting limit, which is a good result.
Mycotoxin testing (for example, aflatoxins) is not part of USP 2023 and is not always on a shilajit COA. Because moulds are a known concern for raw shilajit, a brand that includes mycotoxin results is going further than most.
What does third party tested shilajit really mean?
"Third party tested shilajit" should mean that a laboratory with no financial stake in the brand tested the product. It is worth separating three different things that often get blurred together:
| Term | Who did the testing | How much weight to give it |
|---|---|---|
| In-house tested | The brand's own lab or staff | Useful for routine checks; not independent |
| Supplier COA | The raw material supplier, often abroad | Describes the ingredient, not your finished jar |
| Third-party tested | An independent lab paid to test a sample | Stronger, especially from an ISO/IEC 17025-accredited lab |
| Third-party certified | A certification programme that audits and tests over time | Strongest, if the seal can be verified with the certifier |
Two practical points. First, accreditation is specific: a lab is accredited for particular methods, so the test you care about (for example, metals by ICP-MS) should be within its scope. Second, the sample matters. A COA for the finished product tells you more than one for the raw ingredient, because contamination can be introduced, or concentrated, during processing. The 2025 thallium study found some supplements with more thallium than some raw shilajit samples, which shows that finished-product testing is not a formality.
How to verify a COA is genuine
- Check that the lot number on the COA matches the lot number on your jar.
- Look up the lab and confirm it exists and is accredited.
- Contact the lab with the report number and ask whether the report is authentic. Many labs will confirm this.
- Check that the PDF has not been obviously edited: mismatched fonts, misaligned numbers or a missing signature are warning signs.
What are the red flags on a shilajit COA?
Most bad COAs fail in predictable ways. Watch for these:
- No lot number, or a lot number that does not match your product.
- No lab name, or a lab you cannot find anywhere.
- An old date, especially if the brand has clearly sold many batches since.
- Missing methods. A result with no method cannot be checked or compared.
- Missing units, or units that change between rows without explanation.
- Only "Pass" with no numbers. A pass/fail summary without the actual results hides exactly what you need to calculate.
- Heavy metals missing one of the big four (lead, arsenic, cadmium, mercury).
- Raw-ingredient COA only, presented as if it covers the finished product.
- A fulvic acid figure with no method or no stated basis.
- A COA that is "available on request" but never arrives.
A printable shilajit COA checklist
Print or screenshot this and work through it with the COA open beside you.
| Check | What good looks like | Tick |
|---|---|---|
| Lab identity | Named, independent lab with address and report number | ☐ |
| Accreditation | ISO/IEC 17025, with the relevant test in scope | ☐ |
| Product match | Sample described as shilajit; client matches the brand | ☐ |
| Lot match | COA lot number matches the jar | ☐ |
| Date | Recent, and plausibly the batch on sale | ☐ |
| Lead, arsenic, cadmium, mercury | All four reported with numbers, units and method (often ICP-MS) | ☐ |
| Per-serving check | Each metal per daily serving is well below the USP PDE | ☐ |
| Arsenic | Inorganic arsenic shown, or total arsenic low enough that speciation is not needed | ☐ |
| Microbes | Aerobic count and yeast and mould with limits; E. coli and Salmonella absent | ☐ |
| Fulvic acid | Percentage with named method and basis (dry or as is) | ☐ |
| Identity | Marker or fingerprint test confirming shilajit | ☐ |
| Finished product | Testing done on the finished product, not only the raw ingredient | ☐ |
| Verifiable | Report number the lab can confirm; no signs of editing | ☐ |
For the label and seller red flags that usually travel alongside a weak COA, go back to the seven warning signs of fake shilajit. And if you are wondering what purification has to do with all this, our guide to what purified shilajit is explains how processing changes what ends up on the certificate.
What can lab tested shilajit results not tell you?
A clean COA is necessary, but it is not a guarantee of everything. Be clear about what testing does and does not prove:
- It covers one batch. A COA describes the sample that was tested. It tells you nothing certain about other lots.
- It cannot prove a benefit. Testing shows what is in a product, not what it does. The human evidence for shilajit is limited, and the 2014 Phytotherapy Research review noted that relatively few well-controlled human studies exist and called for more research using standardised products.
- It only answers the questions asked. A metals panel will not detect a microbe, and neither will detect an untested contaminant such as thallium or a mycotoxin.
- "Not detected" depends on the method. A more sensitive method might measure what a less sensitive one could not.
- Limits are reference points, not bright lines. USP, Prop 65 and the FDA's reference levels were set for different purposes. Lower exposure is better, and metals from other sources add up.
How does Biyode's shilajit resin fit this checklist?
Biyode's Pure Himalayan Shilajit Resin is a 30 g jar of unflavoured resin at $34.95. The product page describes it as sourced from the Himalayas, processed using traditional Ayurvedic methods, and containing fulvic acid and trace minerals; it is vegan and gluten-free. The label serving is a pea-sized portion, about 300 mg, once a day, dissolved in warm water, tea or a smoothie, which is the serving size to use in the per-serving arithmetic above.
Biyode publishes its lab documents on its certificates page. Rather than take our word for what they show, open them alongside the checklist in this article and work through each line yourself.

Orders ship free and come with a 30-day money-back guarantee. Other formats, including gummies and honey sticks, are in the shilajit collection.
Who should talk to a doctor first?
Even a well-tested shilajit is not right for everyone. Speak with a doctor or pharmacist before taking it if you are pregnant, trying to conceive or breastfeeding; have haemochromatosis or another iron overload condition; have kidney disease; take prescription medicines, particularly for blood pressure, blood sugar or hormone-related conditions; or are under 18. If you are concerned about lead exposure for any reason, take the COA with you, so your clinician can see the actual numbers rather than a marketing claim.
Related guides
FAQ
Questions readers ask most
What is a certificate of analysis for shilajit?
How much lead is acceptable in shilajit?
Is ppm or ppb better on a heavy metal report?
Should every batch of shilajit be tested?
Does a USP or NSF seal mean the shilajit is safe?
Can I get shilajit tested myself?
References
Scientific bibliography
The studies this article draws on. Tap any source to open it.
- 1Questions and Answers on Dietary Supplements (U.S. Food and Drug Administration)
- 221 CFR 111.70What specifications must you establish? (dietary supplement CGMP)
- 3A Comprehensive Review on Shilajit: What We Know about Its Chemical CompositionPMID 38133965
- 4Ayurvedic Medicine: In Depth (NCCIH)
- 5Lead, mercury, and arsenic in US- and Indian-manufactured Ayurvedic medicines sold via the Internet
- 6National Voluntary Laboratory Accreditation Program (NVLAP), NIST
- 7USP General Chapter 2232 Elemental Contaminants in Dietary Supplements (USP 38-NF 33 text)
- 8Cal. Code Regs. tit. 27, 25805Specific Regulatory Levels: Chemicals Causing Reproductive Toxicity
- 9Cal. Code Regs. tit. 27, 25705Specific Regulatory Levels Posing No Significant Risk
- 10Lead in Food and Foodwares (U.S. Food and Drug Administration)
- 11Quantifying of thallium in Shilajit and its supplements to unveil the potential risk of consumption of this popular traditional medicine
- 12Safety and efficacy of shilajit (mumie, moomiyo)PMID 23733436
- 13A new standardized method for quantification of humic and fulvic acids in humic ores and commercial productsPMID 25051616
- 14Shilajit-analytical study to understand the phyto complex present in shilajit raw material, extract and resin by using hyphenated techniquesPMID 41330163
- 15USP General Chapter 2023 Microbiological Attributes of Nonsterile Nutritional and Dietary Supplements (USP 38-NF 33 text)
Keep reading
All articles
What Is Purified Shilajit? How It Is Made and What to CheckNov 14, 2026
Supplements for Energy: What Actually Helps and What Doesn'tNov 14, 2026
Shilajit para qué sirve: beneficios reales y cómo tomarloNov 14, 2026
Choose your ritual.
- Free shipping on all orders
- Eurofins lab tested
- Secure checkout
*These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.